We disassembled a simple light saber toy by removing 3 screws. We attached a potentiometer with alligator clips and tried to change the sound made. We worked with several components and attached the clips to different places to get different results. We...
We began by removing the basic components of the cellphone. First we removed the battery, and took off the casing. After that, we started to use the screw driver to remove bolted down components. It required the use of a star head. We were able to see t...
We created a robot that was able to draw by combining several components. One of the things we did was connect a fan to a battery. We used a nine volt battery. We then strung rubber bands through the edges. We added crayons and later markers with those ...
I brought in my old printer that wasn’t working. It was a multifunction MP 500 with many features. It was difficult removing the casing, but when we had done that, we were able to see the hundreds of components that the printer consisted of. Th...
We worked on making a robot. We wired an adruino board to several servos in order to run makeshift wheels. The servos had to have their stoppers removed, and the wheels were made from Skippy bottles. We made the frame from a pasltic component
