Function Generator
Oscilloscope
Soldering Irons
Power Supplies
Components (usually bulk donation components)
Convection Oven
UV Oven
[vc_row el_position=”first last”][vc_column][vc_column_text]
Our Epilog laser cutter is available for rent, for $1/minute of cut time. For those times when you need a little extra help, a Geek In Residence is usually on hand to get you started. To book time on the laser cutter, please use the link below.
REMEMBER: Digitally driven prototyping tools like laser cutters may require longer cutting/engraving times than you may think. Please plan accordingly. As a general rule we charge for cut time, so we ask you occupy the laser only when you are ready to cut.
[/vc_column_text][vc_row_inner][vc_column_inner width=”1/4″][/vc_column_inner][vc_column_inner width=”1/4″][vc_column_text]
[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/4″][vc_column_text]
[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/4″][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner][vc_separator color=”grey”][vc_column_text el_position=”first last”]
Our machines are available for member use after completion of the machine safety course. As a general rule, try to limit continued use of any one machine to two hour blocks.
[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_row_inner][vc_column_inner width=”1/4″][vc_column_text]
19 FDM (plastic) 3D printers
– (2) Robo3D R1
– (1) Ultimaker 2
– (1) XYZ DaVinci AIO
Full color Powder 3D Printer
Stereolithography 3D printer
[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/4″][vc_column_text]
(1) Taig 4-axis CNC metal mini-mill
(1) Roland Modela MDX-20 3 axis mill
(1) 2×3 ft. Blackfoot wood CNC router
(2) 24″ Roland GX-24 CAMM-1 Servo vinyl cutter
[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/4″][vc_column_text]
Function Generator
Oscilloscope
Soldering Irons
Power Supplies
Components (usually bulk donation components)
Convection Oven
UV Oven
[/vc_column_text][/vc_column_inner][vc_column_inner width=”1/4″][vc_column_text]
Solidworks Pro 2014
Autodesk Inventor
EagleCAD
Several White Boards and Writeable Walls
Kinect 3D Scanner
XYZ 3D Scanner
[/vc_column_text][/vc_column_inner][/vc_row_inner][vc_column_text]
We also have a large amount of hand tools and power tools available for use (safety class required).
Consumables like materials and bits are not provided by the Lab. CNC mills will require to bring your own bit, or buy one from the lab (we stock bits for the Modela only).
Electronics accessories like Arduinos, Raspberry Pi’s, and other more advanced robotic boards are also available for check out.
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column][vc_column_text]
[/vc_column_text][/vc_column][/vc_row]