[vc_row][vc_column width=”1/1″][vc_column_text]
MEMBERS: TO SCHEDULE TIME ON THE LASER EMAIL COMMUNICATIONS@FABLABSD.ORG
MEMBERS: TO SCHEDULE TIME ON THE LASER EMAIL COMMUNICATIONS@FABLABSD.ORG
[/vc_column_text][/vc_column][/vc_row][vc_row][vc_column width=”2/3″][vc_column_text]
[/vc_column_text][vc_column_text]
Brand: Epilog
Power: 40w
Cutting Area: 24″ X 12″
All materials must be certified laser safe before they can be used.
If it is not on the approved materials list on this page, it is generally not laser safe.
File Type: PDF is the best. Illustrator, Inkscape, or and drawing program can be used.
For Cuts: Use a vector drawing program like Illustrator, and make the stroke width of cut lines 0.001″ (inches).
For Engraving: Anything not 0.001″ will be engraved.
Learn more about preparing your files for laser cutting/etching here
[/vc_column_text][vc_row_inner][vc_column_inner width=”1/1″][/vc_column_inner][/vc_row_inner][/vc_column][vc_column width=”1/3″][vc_column_text]
Engrave | Cut | |
---|---|---|
Wood | x | x |
Acrylic | x | x |
Fabric | x | x |
Glass | x | |
Coated Metals | x | |
Ceramic | x | |
Delrin | x | x |
Cloth | x | x |
Leather | x | x |
Marble | x | |
Matte Board | x | x |
Melamine | x | x |
Paper | x | x |
Mylar | x | x |
Pressboard | x | x |
Rubber | x | x |
Wood Veneer | x | x |
Fiberglass | x | x |
Painted Metals | x | |
Tile | x | |
Plastic | x | x |
Cork | x | x |
Corian | x | x |
Anodized Aluminum | x | |
Stainless Steel | * | |
Brass | * | |
Titanium | * | |
Bare Metals | * | |
* CO2 lasers will mark bare metals when coated with a metal marking solution. For more information, visit our laser metal marking page. |
[/vc_column_text][/vc_column][/vc_row]