Vinyl cutter
Overview
Using the Roland Plotter to cut out stickers using Roland cut studio plug in. If you don’t have the Roland cut studio plug in here’s the link for the software.
Step 1:
Open up Adobe Illustrator
Step 2:
Click File then open up the artwork
Step 3:
Click on selection tool, click on image
Step 4:
Click on window to go to cut studio plug in
Step 5:
Click on Output path to cut studio
Step 6:
Send file to the plotter by clicking on the cutting button
Step 7:
Select the material
Step 8:
Press enter on the operation panel so that the Cutting Carriage will move out of the way.
Step 9:
Pull loading lever up so we can secure the rollers
Step 10:
Insert the material in rollers
Step 11:
Make sure to secure rollers so that the material wont move.
Step 12:
Double check to see that the rollers are in the Verification Marks
Step 13:
Send file to Roland plotter.
Step 14:
Press Enter
Step 15:
only cut out the wanted material
Step 16:
cut out finished material